Skid systems are tailored to manufacturing facilities and arrive assembled. It simply needs to be attached to an already working manufacturing process.

But a standard modular process skid design may not fit across all process systems in an industrial plant.

This blog highlights the importance of custom skid design and explains how you can ensure that the skid connects seamlessly with your existing equipment by following common design inputs.

For additional information regarding custom skid design solutions, check out our modular skid design services page.

What is a custom skid?

It’s a skid frame designed to fit components and piping systems for a particular project requirement. While the skid design process remains the same, the skid design requirements change based on the conditions and factors specified for the project.

It is no longer just a package of pumps and valves, but a solution that improves a plant's production capacity.

How is a skid design customised?

A skid design is customised based on the manufacturer’s requirements and the industry in which it will operate. It’s a compact and integrated solution tailored to a project’s technical and operational needs. This includes equipment specifications, operating conditions, and installation environment.

The design is developed after analysing several factors, including:

  • Number and type of equipment to be fitted within the frame
  • Maximum load capacity of the frame
  • Type of loads the frame is designed to withstand
  • Lifting and transportation requirements for the skid

The structural framing of the skid is designed to hold a particular section of a piping or process system. It can function as a self-contained unit, within the larger manufacturing process, when integrated with the necessary instrumentation and control systems.

Understanding project requirements

The skid frame’s strength is analysed according to the requirements and conditions of the plant. During the design stage, piping engineers perform stress analysis of the skid frame and associated piping and equipment to determine whether the system can withstand varying environmental conditions, dynamic and static loads, and excessive vibration.

The frame is also assessed for structural integrity to ensure it can be safely transported and installed.

Space constraints

A smaller or larger footprint determines skid frame alignment. A stacked component layout is ideal for vertical pipe flow, while a horizontal skid frame is more suitable when piping needs to extend across the plant.

A constrained footprint can create challenges for maintaining continuous pipe runs and may also limit access for inspection and maintenance.

Integration with existing piping

Design engineers use 3D models to visualise the piping arrangement across a plant. The models, combined with P&IDs, help engineers identify and locate pipe tie-in connections. The piping components within the skid are then sized and positioned to match these connection points for a smooth integration with the plant’s existing piping system.

Compliance

Specific codes and standards are followed to maintain the structural integrity and quality of the skid frame. Depending on the application, this may include ASME and ANSI standards for piping design, ISO standards for welding and maintaining quality and other applicable codes governing hygiene, industry-specific requirements, and hazardous environments.

Which type of skid suits your industrial application?

Skid frames are used across a variety of industries, including oil and gas, pharmaceutical, energy, and chemical processing. A skid design should fit the industrial and manufacturing needs of your plant. Choosing the right industrial skid depends on factors such as process requirements, operating conditions, materials, and equipment.

Here are some of the common skid systems used across industries:

RO Skid

A reverse osmosis skid holds a water treatment system inside the skid frame. The RO unit includes pumps, valves, and filtration components. The pre-treated feed water is purified using high-pressure membranes to remove chemicals and dissolved salts.

Metering Skid

This skid system houses measurement instruments to monitor the volume of liquids and gases. It helps accurately measure these components (fuel, oil, and chemicals) for custody transfer and other commercial transactions. The skid also includes strainers, control valves, flow meters, and provers to control flow and verify measurement accuracy.

Air Compressor Skid

This skid contains components of an air compressor system. The system generates high-pressure compressed air using an air compressor, with an air receiver, dryer, and separators used to store, dry, and condition compressed air. The compressor package is monitored using pressure gauges and control panels mounted on the skid.

Heat Exchanger Skid

This structural frame supports industrial fluid management. It contains the components of a heat exchanger, pumps, valves and controls. The heat exchanger keeps hot and cold fluids separated while transferring heat between them through a metal barrier (shell-and-tube or plates). It adjusts the temperature of the fluids for oil and gas processing, water heating systems, and power generation.

Electrical & Instrumentation Skid

This skid contains control panels and various electrical hardware and instrumentation components used to monitor and control plant operations when integrated with the piping systems. It contains sensors, transmitters, HMIs (human-machine interfaces), junction boxes, and power distribution panels. These help control the flow and movement of fluids and gases and the operation of equipment within the piping systems.

Experts at Sedin Engineering are experienced in developing custom skid designs across industries, visit our modular skid design service page for more details.

What are the common design inputs for Custom Skid Design?

Common design inputs help engineers develop a custom skid design that meets operational, safety, and transportation requirements. They include process parameters, material requirements, equipment specifications, and site conditions.

Here are some common design inputs that can be given to a plant and piping design engineering team to get skid systems customised:

Operating conditions

Before beginning the skid design layout, it's important to consider the operating conditions and processing requirements of the plant.

Give the design engineer a brief about your project including:

  • Describe what the plant produces (oil refinery, water treatment or desalination plant)
  • Expected pressure ranges in the piping systems
  • Required flow rates to be maintained
  • Significant loads and stresses caused by continuous operations
  • Contents (fluids, gases, and chemicals) flowing through the pipes

Material and Fabrication

Industrial piping is defined by a set of codes and standards specifying the required strength, dimensions and chemical makeup of the materials.

Specifying the materials used for the piping in your facility will help design engineers select the right and suitable materials for the skid frame and ensure it is:

  • Corrosion resistant
  • Load-bearing
  • Protectively coated
  • Durable and long-lasting

Provide a brief on the acceptable dimensions and alignment tolerances for skid fabrication, so the skid frame can be cut, bent, and welded to fit the equipment inside for installation and operation.

Piping and Process requirements

An industrial plant operates according to a defined process that determines how raw materials are transformed into the desired products. The process consists of a sequence of operations carried out by different equipment and systems to produce the final product.

The process also provides an objective for designing the piping layout, it helps determine:

  • Pipe sizing
  • Pipe schedule
  • Equipment orientation
  • Accessibility
  • Maintenance clearance

Understanding this process and the piping layout can help plant engineers determine the role of the skid in the overall plant.

Instrumentation and Controls

The control system should tie in with the overall process requirements of the plant.

Equipment and instruments such as valves, pumps, temperature sensors, and pressure gauges should be connected to the instrumentation and control system where monitoring or automatic control is required.

The parameters that directly affect the final product should be automatically controlled to maintain product quality. It should be integrated into control systems such as:

  • DCS (Distributed Control System)
  • SCADA (Supervisory Control and Data Acquisition)
  • HMI (Human-Machine Interface)
  • PLC (Programmable Logic Controller)

These systems exchange signals and process data using defined communication protocols.

Provide a brief regarding the equipment to be installed in the skid so it can be appropriately positioned, supported, and integrated into the skid frame.

Environmental Conditions

Skids can be installed both outdoors and indoors. However, outdoor skids are exposed to the environmental conditions at the plant location.

In these situations, it's important to provide a brief description of the site’s environmental conditions, including seasonal variations in temperature, humidity, and atmospheric corrosivity.

The material selection, design, and fabrication of the skid should include relevant site-specific ambient conditions and their seasonal variations, such as the following parameters:

  • Sun exposure
  • Ambient temperature
  • Wind speed
  • Seismic conditions
  • Rainfall
  • Hazardous area classification

The design implications of the skid vary depending on the severity of the environmental conditions at the plant location. These parameters serve as a helpful guide.

For example, if the plant is located in an area prone to heavy rainfall or high wind speeds, the skid may require suitable enclosures, weatherproofing, drainage, and corrosion-resistant materials to protect the equipment and components from the surrounding environment.

Utility requirements

A skid needs connections and controls to function as intended. It may require the utilities available at the plant to support its operation.

These utilities enable designers to configure the skid and include the materials and tools required for the plant’s intended operation.

Give the designer a brief of not only the utilities available, but also the parameters that would help them design the skid for a smoother integration with existing plant systems:

  • Voltage, frequency, and power capacity for electrical connections
  • Type of drain, connection size, and allowable discharge
  • Pressure, temperature, and quality of service water
  • Capacity and air pressure inside the plant
  • Supply temperature, flow, and pressure of cooling water

These parameters help select and appropriately size the equipment, piping, and instrumentation required for the skid.

Tell us about your Custom Skid Design requirements

If you’re planning to have skids custom designed for your facility, it's best to work with experienced design engineers.

Sedin Engineering works with manufacturers to develop custom skid designs suited to the specific requirements of your facility. Our engineers, part of our plant and piping design services team, coordinate across disciplines to produce accurate and practical designs that are optimised for fabrication and seamless integration into your plant.

Contact our team to discuss your requirements in more detail and explore how we can support your skid design needs.